on FC4 my sony camera showed up in fstab on /media as soon
as i plugged it in, and it mounted just fine.  on suse10,
it doesn't.  the yast hardware probing shows the following:

----- hal device list -----
  0: udi = '/org/freedesktop/Hal/devices/usb_device_54c_10_noserial_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_54c_10_noserial_if0'
  linux.subsystem = 'usb'
  linux.hotplug_type = 1 (0x1)
  info.product = 'USB Mass Storage Interface'
  usb.interface.protocol = 1 (0x1)
  usb.interface.subclass = 255 (0xff)
  usb.interface.class = 8 (0x8)
  usb.interface.number = 0 (0x0)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0/usb3/3-1/3-1:1.0'
  usb.configuration_value = 1 (0x1)
  usb.num_configurations = 1 (0x1)
  usb.num_interfaces = 1 (0x1)
  usb.device_class = 0 (0x0)
  usb.device_subclass = 0 (0x0)
  usb.device_protocol = 0 (0x0)
  usb.vendor_id = 1356 (0x54c)
  usb.product_id = 16 (0x10)
  usb.vendor = 'Sony Corp.'
  usb.product = 'USB Mass Storage Interface'
  usb.device_revision_bcd = 1072 (0x430)
  usb.max_power = 500 (0x1f4)
  usb.num_ports = 0 (0x0)
  usb.linux.device_number = 4 (0x4)
  usb.speed_bcd = 4608 (0x1200)
  usb.version_bcd = 272 (0x110)
  usb.is_self_powered = false
  usb.can_wake_up = false
  usb.bus_number = 3 (0x3)
  info.bus = 'usb'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_54c_10_noserial'
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0/usb3/3-1/3-1:1.0'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0/usb3/3-1/3-1:1.0'

  1: udi = '/org/freedesktop/Hal/devices/usb_device_54c_10_noserial'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_54c_10_noserial'
  linux.subsystem = 'usb'
  linux.hotplug_type = 1 (0x1)
  usb_device.bus_number = 3 (0x3)
  usb_device.can_wake_up = false
  usb_device.is_self_powered = false
  usb_device.version_bcd = 272 (0x110)
  usb_device.speed_bcd = 4608 (0x1200)
  usb_device.linux.device_number = 4 (0x4)
  usb_device.num_ports = 0 (0x0)
  usb_device.max_power = 500 (0x1f4)
  usb_device.device_revision_bcd = 1072 (0x430)
  info.product = 'DSC-S30/S70/S75/F505V/F505/FD92 Cybershot/Mavica Digital Camera'
  usb_device.product = 'DSC-S30/S70/S75/F505V/F505/FD92 Cybershot/Mavica Digital Camera'
  info.vendor = 'Sony Corp.'
  usb_device.vendor = 'Sony Corp.'
  usb_device.product_id = 16 (0x10)
  usb_device.vendor_id = 1356 (0x54c)
  usb_device.device_protocol = 0 (0x0)
  usb_device.device_subclass = 0 (0x0)
  usb_device.device_class = 0 (0x0)
  usb_device.num_interfaces = 1 (0x1)
  usb_device.num_configurations = 1 (0x1)
  usb_device.configuration_value = 1 (0x1)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0/usb3/3-1'
  info.linux.driver = 'usb'
  info.bus = 'usb_device'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_04_0'
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0/usb3/3-1'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0/usb3/3-1'

so the camera is obviously there and seen by the system.
how do i access it?  any suggestions would be helpful.

tia,
dan

j. daniel moylan
84 harvard ave #2
brookline, ma 02446-6202
617-232-2360 (tel)
617-777-0207 (cel)
810-454-1823 (fax)
jdm@moylan.info
www.moylan.info