sane devices

dan moylan dmoylan at ibm.net
Tue Sep 29 08:06:58 EDT 1998


-------------- next part --------------
to:     discuss
from:   dan moylan
ref:    dsc0929.out
subj:   sane devices

i have installed sane on my desktop (running redhat linux 5.0, kernel
2.0.32), and whereas the basic sane functionality seems to be there,
my scanner device is not seen by the program.  i.e.  scanimage -L gives
only pnm:0 and pnm:1.

the kernel on my desktop doen't have inherent scsi support, and dmesg
accordingly finds no devices initially.  after running the module
installs, all is seemingly ok.  i have only 2 scsi devices, a cdrom on
sr0 and the other (scanner) on sga.  appended is the tail of the
initial dmesg, the module installs, and the tail of the final dmesg.  

i removed /dev/scanner, leaving only sga, w/ major nr 21, and scanimage -L
still gave only pnm:[01].  putting in the link ln -s /dev/sga /dev/sanner
doesn't help.  could there possibly be some part of sane that i have not
installed?

####################### initial dmesg (tail) ##########################

scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 hda3
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 >
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 28220k swap-space (priority -1)
Adding Swap: 77076k swap-space (priority -2)
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:01
end_request: I/O error, dev 02:01, sector 0
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035

######################### module installs #############################

	  insmod aha1542
	  insmod 8390
	  insmod sg
	  insmod ne io=0x300

######################### final dmesg (tail) ##########################

Configuring Adaptec (SCSI-ID 7) at IO:334, IRQ 12, DMA priority 7
scsi1 : Adaptec 1542
scsi : 1 host.
  Vendor: UMAX      Model: Astra 1200S       Rev: V2.8
  Type:   Scanner                            ANSI SCSI revision: 02
  Vendor: TOSHIBA   Model: CD-ROM XM-4101TA  Rev: 0064
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0
Detected scsi generic sga at scsi1, channel 0, id 2, lun 0
loading device 'eth0'...
ne.c:v1.10 9/23/94 Donald Becker (becker at cesdis.gsfc.nasa.gov)
NE*000 ethercard probe at 0x300: 00 40 05 61 8b 53
eth0: NE2000 found at 0x300, using IRQ 5.
loading device 'eth1'...

########################## dass ist alles #############################


More information about the Discuss mailing list